Search results for "CE [GGAG]"
showing 10 items of 29328 documents
Electrical conductivity of glass fiber-reinforced plastic with nanomodified matrix for damage diagnostic
2021
The electrical conductivity of glass fiber-reinforced plastic (GFRP) with epoxy matrix modified by multiwall carbon nanotubes (MWCNT) was studied. The electrical conductivity of nanomodified lamina and multi-layered GFRP was investigated on several levels using a structural approach. Components of the electrical conductivity tensor for unidirectional-reinforced monolayer were calculated similarly as in micromechanics using the conductivity of the nanomodified matrix. The electrical conductivity of multilayer composite was calculated using laminate theory and compared with values measured experimentally for various fiber orientation angles. Calculated and experimental data were in good agree…
Examining Consumers’ Usage Intention of Contactless Payment Systems
2019
Purpose The purpose of this paper is to develop and test a conceptual model that combines the modified Unified Theory of Acceptance and Use of Technology (UTAUT2) with a consumer brand engagement (CBE) model to predict consumers’ usage intentions toward contactless payment systems in a developed country. Design/methodology/approach The authors cooperated with a contactless payment service provider in Finland and reached out to 22,000 customers, resulting in 1,165 usable responses. The collected data were analyzed using structural equation modeling. Findings The study shows that the UTAUT2 and the CBE model together explain approximately 70 percent of the variance in usage intention. Of the…
Particle balance and return loops for microplastics in a tertiary-level wastewater treatment plant.
2021
Highlights: Dewatering by centrifugation was a step that removed a high number of MPs from the sludge. Sludge retained especially the fibrous microplactics. Reject water transported microplastics inside a wastewater treatment plant. Disc filter-based tertiary treatment ensured removal of 99% of microplastics in wastewater. Microplastics (MPs) from households, stormwater, and various industries are transported to wastewater treatment plants (WWTPs), where a high proportion of them are captured before discharging their residuals to watersheds. Although recent studies have indicated that the removed MPs are mainly retained in wastewater sludge, sludge treatment processes have gained less atten…
Biopolymer Recovery from Aerobic Granular Sludge and Conventional Flocculent Sludge in Treating Industrial Wastewater: Preliminary Analysis of Differ…
2022
The recovery of biopolymers from sewage sludge could be a crucial step in implementing circular economy principles in wastewater treatment plants (WWTP). In this frame, the present study was aimed at evaluating the simultaneous production of polyhydroxyalkanoates (PHA) and extracellular polymeric substances (EPS) obtainable from the treatment of agro-industrial wastewater. Two biological enrichment systems, aerobic granular sludge (AGS) and a conventional activated sludge operating as a sequencing batch reactor (SBR), were monitored for 204 and 186 days, respectively. The maximum biopolymers accumulation capacity was close to 0.60 mgPHA-EPS gVSS−1 in the AGS when operating at 3 kgCODm…
Alternative analysis of transient infiltration experiment to estimate soil water repellency
2019
The repellency index (RI) defined as the adjusted ratio between soil‐ethanol, Se, and soil‐water, Sw, sorptivities estimated from minidisk infiltrometer experiments has been used instead of the widely used water drop penetration time and molarity of ethanol drop tests to assess soil water repellency. However, sorptivity calculated by the usual early‐time infiltration equation may be overestimated as the effects of gravity and lateral capillary are neglected. With the aim to establish the best applicative procedure to assess RI, different approaches to estimate Se and Sw were compared that make use of both the early‐time infiltration equation (namely, the 1 min, S1, and the short‐time linear…
Levels and Potential Health Hazards of Chlorinated Pesticidesin Surface Water Samples of Charsadda Area of Pakistan Using SPME-GC-ECD Technique
2021
In the present study, we determined the levels of chlorinated pesticide residues in surface water samples collected from the Charsadda district (KPK, Pakistan). SPME-GC-ECD with COMBI PAL CTC autosampler was used for extraction and analysis of 20 organochlorine pesticides in the collected water samples. For maximum efficiency of the SPME procedure, several parameters were studied, including the extraction and desorption time of the fiber, solution pH, agitation of samples, and stirring speed, etc. This method showed good liner response, with R2 values in the range of 0.9887 to 0.9999 for all pesticides. This method also provided good percent recoveries at 1 µg L−1 (87.5 to 106.0%) and at 2 …
Application of a Split-Window Algorithm to Estimate Land Surface Temperature from NOAA-AVHRR Data
2006
Estimaciones de temperatura de la superficie terrestre, en días parciales a completamente despejados, fueron realizadas a partir de los datos proporcionados por el sensor Advanced Very High Resolution Radiometer (AVHRR), a bordo de la serie de satélites de la National Oceanic and Atmospheric Administration (NOAA) por aplicación de un algoritmo basado en el método de Split-Window. El algoritmo utilizado supone correcciones por emisividad y contenido de vapor de agua atmosférico, y fue validado con mediciones de temperatura de la superficie terrestre realizadas en terreno. Para esto, un data logger LI-1000 se instaló en la Estación Agrometeorológica dependiente del Instituto de Investigacione…
Practice for determining friction in hydraulic winch systems
2020
This paper presents a method for estimating friction in hydraulic active heave compensated (AHC) offshore winches. The method is a two-step approach where the first step is to model the friction loss in the hydraulic motors based on data from the sub-supplier. The second step requires real-life testing, where the remaining friction losses in the winch system is identified and modeled. In this context, a practice is characterized by obtaining a friction loss estimation with the highest possible accuracy over the widest possible range of operating conditions with a limited amount of experimental work. The method benefits from the use of parametric models, sub-supplier data, and real-life meas…
Learn to Cache: Machine Learning for Network Edge Caching in the Big Data Era
2018
The unprecedented growth of wireless data traffic not only challenges the design and evolution of the wireless network architecture, but also brings about profound opportunities to drive and improve future networks. Meanwhile, the evolution of communications and computing technologies can make the network edge, such as BSs or UEs, become intelligent and rich in terms of computing and communications capabilities, which intuitively enables big data analytics at the network edge. In this article, we propose to explore big data analytics to advance edge caching capability, which is considered as a promising approach to improve network efficiency and alleviate the high demand for the radio resou…
A Double Auction Mechanism for Virtual Resource Allocation in SDN-based Cellular Network
2016
The explosively growing demands for mobile traffic service bring both challenges and opportunities to wireless net- works, among which, wireless network virtualization is proposed as the main evolution towards 5G. In this paper, we first propose a Software Defined Network (SDN) based wireless virtualization architecture for enabling multi-flow transmission in order to save capital expenses (CapEx) and operation expenses (OpEx) significantly with multiple Infrastructures Providers (InPs) and multiple Mobile Virtual Network Operators (MVNOs). We for- mulate the virtual resource allocation problem with diverse QoS requirements as a social welfare maximization problem with transaction cost. Due…